corrosion resistance

英 [kəˈrəʊʒn rɪˈzɪstəns] 美 [kəˈroʊʒn rɪˈzɪstəns]

耐腐蚀性

机械



双语例句

  1. The Influence of Ni and V on the Corrosion Resistance of Hot-dipped Galvanizing Coating
    Ni和V对热浸镀锌层耐蚀性能的影响
  2. A new method was applied to the test of corrosion resistance of SiC-Si3N4 material.
    研究了氮化硅结合碳化硅材料耐腐蚀性能的测试方法。
  3. The microstructure, microhardness, bonding strength and corrosion resistance to molten zinc of the coatings were studied.
    测试了涂层的显微组织、显微硬度、结合强度及耐熔融锌液腐蚀性能。
  4. Higher temperature corrosion resistance and mechanical properties.
    更好的耐温度腐蚀能力和机械性能。
  5. The screen mesh and the outer cover adopt stainless steel, to improve corrosion resistance and extend service life.
    筛网和外罩采用不锈钢制作,提高抗腐蚀能力延长设备使用寿命。
  6. The presence of contaminants in the system can significantly affect the corrosion resistance and compatibility of many metals.
    在系统内存在污染物会大大地影响许多材料的抗腐蚀性和相容性。
  7. If surface treatment is conducted, the wearability and corrosion resistance may be further improved.
    如施以表面处理可进一步提高耐磨性和耐蚀性。
  8. An overall chromium coating improves the corrosion resistance of the generally used through-hardening rolling bearing steel.
    一个总铬涂层提高了耐腐蚀性能的普遍使用,通过硬化滚动轴承钢。
  9. The corrosion resistance of Ti biomedical materials in body fluids was reviewed.
    综述了钛生物医学材料在体液中的耐蚀性能。
  10. The powder product wear resistance, corrosion resistance, good sliding friction.
    该粉末产品耐磨性,耐蚀,耐滑动摩擦性好。
  11. Bolts and nuts are plated for corrosion resistance.
    螺栓和螺母经过电镀防腐蚀处理。
  12. The product has excellent corrosion resistance and heat resistance.
    该产品具有优良的抗腐蚀性能和耐热性能。
  13. Effect of nitrogen content and environment temperature on the corrosion resistance of 316L stainless steel
    氮含量和环境温度对316L不锈钢耐腐蚀性的影响
  14. Head and cap are machined from ( 6061-T6) solid aluminum bar and anodized for corrosion resistance.
    头帽的加工和从(6061-扩建)固体铝棒和耐腐蚀的阳极。
  15. Results show that cerium conversion film improves the corrosion resistance of RE-Mg alloys remarkably.
    实验结果表明铈转化膜显著地提高了镁合金的耐腐蚀性能。
  16. The reason that the optimized technology could improve the nodular corrosion resistance was discussed.
    对改进工艺的试样抗疖状腐蚀的原因进行了讨论。
  17. Deposited metal can meet high welding quality and corrosion resistance.
    熔敷金属能满足较高的焊接质量和耐腐蚀性能。
  18. Due to the formation of low melting calcium-aluminates the corrosion resistance and hot erosion strength are reduced.
    由于低熔点的铝酸钙的形成,火砖的抗腐蚀能力和抗热蚀强度降低了。
  19. The effects of the pigment and the coated pigment on the corrosion resistance of UV curing coatings are investigated.
    研究了光固化涂料中颜料和经过包覆改性后的颜料对涂层耐蚀性能的影响。
  20. The properties of conversion film, such as corrosion resistance and adhesion strength to different coatings, were studied.
    研究了膜层的耐蚀性及其与不同漆膜之间的附着力。
  21. The zinc distribution and corrosion resistance of the laser-welded joint of galvanized steel were investigated.
    研究了镀锌板激光焊接接头锌的分布及焊接接头耐蚀性能。
  22. Engineers need an understanding of the mechanical strength and corrosion resistance of various materials.
    工程师需要了解各种材料的机械强度和耐腐蚀的能力。
  23. The reason of A environmental protection passivating films with excellent corrosion resistance was discussed.
    并讨论了A型环保钝化膜耐腐蚀性能优异的原因。
  24. Micro-arc oxidation can improve effectively the corrosion resistance of magnesium alloy.
    微弧氧化技术能够有效提高镁合金的耐蚀性。
  25. Corrosion resistance of zinc impregnation and dacromet coating was studied by environmental corrosion test and electrochemical measurement techniques.
    通过实际环境腐蚀试验和电化学测试,研究了粉末渗锌涂层和达克罗涂层在不同水环境中的耐蚀性能。
  26. Typical uses: it has excellent forming characteristics, high corrosion resistance, good welding and electrical conductivity.
    典型用途:具有极佳的成型加工特性,高耐腐蚀性、良好的焊接性和导电性。
  27. Its features are high density, high strength, high corrosion resistance, high thermal resistance and volume stability.
    其特点是高致密度、高强度、高抗侵蚀性、高热阻和体积稳定性。
  28. The results showed that the corrosion resistance and bioactivity of the bio-magnesium materials with heat-self-assembled monolayer were improved.
    结果表明,热自组装膜改善了镁基生物材料的腐蚀抗力和生物活性。
  29. Electrochemical measurement is employed to study the corrosion resistance of the titanium alloy after anodizing.
    采用电化学方法研究了阳极氧化后钛合金的耐腐蚀性能。